Honda CBF600SA Service Manual page 433

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
REAR WHEEL/SUSPENSION
Apply grease to the dust seal lips, then install the
SIDE COLLARS
dust seals into the right swingers pivot.
Fill the grease up between the inner dust seal and
needle bearing.
Install the pivot side collars.
DUST SEALS
Apply grease to the dust seal lips, then install the
dust seals and pivot collar into the left swingers
pivot.
DUST SEALS
PIVOT COLLAR
Install the drive chain slider aligning the slit with the
DRIVE CHAIN SLIDER
BOSSES/HOLES
boss on the swingarm.
Install the drive chain slider bosses into the holes in
the swingarm.
SLIT/BOSS
Install and tighten the drive chain slider bolts to the
SCREWS
DRIVE CHAIN SLIDER
specified torque.
TORQUE: 5.9 N·m (0.60 kgf·m, 4.3 lbf·ft)
14-23
email: info@motomatrix.co.uk