Honda CBF600SA Service Manual page 303

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
INSTALLATION
DRIVE SPROCKET GUIDE
CHAIN GUIDE A
CLUTCH DISCS/
CLUTCH PLATES
THRUST WASHER
LOCK WASHER
Apply molybdenum oil solution to the oil pump
drive sprocket guide sliding surface and install it to
the mainshaft.
Apply oil to the oil pump drive/driven sprocket teeth
and drive chain.
Install the oil pump drive/driven sprocket and drive
Install the oil pump
chain as an assembly.
driven sprocket
with its "OUT" mark
Apply a locking agent to the oil pump driven
facing out.
sprocket bolt threads.
Install the oil pump driven sprocket bolt, washer
Be careful not to
and tighten the bolt to the specified torque.
drop the parts into
the oil pan.
TORQUE: 15 N·m (1.5 kgf·m, 11 lbf·ft)
email: info@motomatrix.co.uk
CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
CHAIN GUIDE B
LIFTER PIECE
LOCK NUT
LIFTER BEARING
128 N·m (13.1 kgf·m,
94 lbf·ft)
CLUTCH OUTER
NEEDLE BEARING
CLUTCH OUTER GUIDE
THRUST WASHER
15 N·m (1.5 kgf·m,
11 lbf·ft)
SPRING
12 N·m (1.2 kgf·m, 9 lbf·ft)
LIFTER PLATE
DRIVE SPROCKET GUIDE
DRIVE SPROCKET
"OUT" MARK
DRIVEN SPROCKET
CLUTCH CENTER
SPRING SEAT
JUDDER SPRING
DRIVE CHAIN
BOLT/WASHER
9-13