Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
FUEL SYSTEM (PGM-FI)
Disconnect the PAIR control solenoid valve 2P
(Black) connector.
Pull the PAIR control solenoid valve out the stay.
Installation is in the reverse order of removal.
Inspection
Remove the PAIR control solenoid valve.
Check that air flows (A) to (B) when the 12 V battery
is connected to the PAIR control solenoid valve ter-
minals. Air should not flow (A) to (B) when the bat-
tery is disconnected.
Check the resistance between the terminals of the
PAIR control solenoid valve.
STANDARD: 23 – 27 Ω (20 °C/68 °F)
If the resistance is out of specification, replace the
PAIR control solenoid valve.
5-100
email: info@motomatrix.co.uk
2P (Black) CONNECTOR
PAIR CONTROL
SOLENOID VALVE
(B)
PAIR SOLENOID VALVE
STAY
(B)
(A)