Honda CBF600SA Service Manual page 406

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
FRONT WHEEL/SUSPENSION/STEERING
Temporarily install the steering stem nut onto the
stem to prevent the threads from being damaged
when removing the lower bearing inner race from
the stem.
Remove the lower bearing inner race with a chisel
or equivalent tool, being careful not to damage the
stem.
Remove the dust seal.
Apply grease to a new dust seal lips and install it
over the steering stem.
Install a new lower bearing inner race using a spe-
cial tool and a hydraulic press.
TOOL:
Steering stem driver
INSTALLATION
: BEARINGS
: BEARING RACE
: DUST SEAL
STEERING STEM NUT
103 N·m
(10.5 kgf·m, 6 lbf·ft)
TOP BRIDGE
STEERING STEM
CBF600S/N only
13-38
email: info@motomatrix.co.uk
DUST SEAL
07946-MB00000
LOWER
INNER RACE
UPPER DUST SEAL
STEERING STEM NUT
LOWER INNER RACE
LOCK NUT
ADJUSTMENT NUT
UPPER INNER RACE
UPPER BEARING
UPPER OUTER RACE
LOWER OUTER RACE
LOWER BEARING
LOWER INNER RACE
LOWER DUST SEAL
STEERING
STEM DRIVER
DUST SEAL
LOCK WASHER