Honda CBF600SA Service Manual page 384

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
FRONT WHEEL/SUSPENSION/STEERING
Loosen the left axle holder bolt.
Remove the axle and the front wheel.
CBF600SA/NA:Be
careful not to
damage the speed
sensor on the brake
caliper.
Remove the side collars.
INSPECTION
Axle
Set the axle in V-block and measure the runout.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 0.2 mm (0.01 in)
Wheel bearing
Turn the inner race of each bearing with your finger.
The bearings should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in
the hub.
Remove and discard the bearings if they do not turn
Replace the
smoothly, quietly, or if they fit loosely in the hub.
bearings in pairs.
Replace the new bearings, if necessary (page 13-18).
13-16
email: info@motomatrix.co.uk
HOLDER BOLT
LEFT SIDE:
SIDE COLLARS
WHEEL BEARING
AXLE
RIGHT SIDE:
AXLE