Honda CBF600SA Service Manual page 83

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Fill the recommended engine oil up to the upper
level line.
SUGGESTED OIL:
Other viscosities
shown in the chart
Honda "4-stroke motorcycle oil" or an equivalent
may be used when
OIL RECOMMENDATION:
the average
API classification: SG or higher (except oils labeled
temperature in your
energy conserving on the circular API service
riding area is within
label)
the indicated range.
Viscosity: SAE 10W-30
JASO T 903 standard: MA
Reinstall the oil filler cap.
ENGINE OIL & FILTER CHANGE
Start the engine and let it idle for 3 – 5 minutes.
Change the oil with
Stop the engine and wait 2 – 3 minutes.
the engine warm
and the motorcycle
Stop the engine and remove the oil filler cap.
on level ground to
assure complete
draining
Remove the drain bolt and sealing washer, then
drain the oil completely.
Remove and discard the oil filter cartridge using the
special tool.
TOOL:
Oil filter wrench
email: info@motomatrix.co.uk
07HAA-PJ70101
OIL FILLER CAP
OIL DRAIN BOLT/SEALING WASHER
OIL FILTER CARTRIDGE
MAINTENANCE
OIL FILTER WRENCH
3-15