Honda CBF600SA Service Manual page 408

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
FRONT WHEEL/SUSPENSION/STEERING
Install a new lock washer onto the steering stem.
Align the tabs of the lock washer with the grooves in
the adjustment nut and bend two opposite tabs
(shorter) down into the adjustment nut groove.
Install and finger tighten the lock nut.
Do not over tighten
Hold the lock nut and further tighten the lock nut
the lock nut until
within 1/4 turn (90°) enough to align its grooves
the lock washer
with the lock washer tabs.
being flat.
Bend the lock washer tabs up into the lock nut
groove.
Install the mounting bolt and stay.
CBF600SA/NA only:
Install the bolt and separate brake pipe joint.
Be careful not to
bend or damage
the brake pipes.
Apply a locking agent to the hose clamp bolt.
CBF600N/S only
Install the brake hose clamp and tighten the bolt to
the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the forks (page 13-20).
Install the headlight case bracket assembly to the
bottom bridge (page 20-9).
13-40
email: info@motomatrix.co.uk
LOCK NUT
ADJUSTMENT NUT
LOCK WASHER
MOUNTING BOLT
BOLT
BOLT
LOCK WASHER
LOCK NUT
TAB
STAY
BRAKE PIPE JOINT
HOSE CLAMP