Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
LUBRICATION SYSTEM
Remove the oil pump cover and dowel pins.
Remove the thrust washer, drive pin, oil pump
shaft, outer rotor and inner rotor from the oil pump
body.
Clean all disassembly parts thoroughly.
INSPECTION
Temporarily install the outer and inner rotors into
If any portion of the
the oil pump body.
oil pump is worn
Temporarily install the drive pin and oil pump shaft.
beyond the service
limit, replace the oil
Measure the rotor tip clearance.
pump as an
assembly.
SERVICE LIMIT: 0.20 mm (0.008 in)
Measure the pump body clearance.
SERVICE LIMIT: 0.35 mm (0.014 in)
4-10
email: info@motomatrix.co.uk
OIL PUMP BODY
DOWEL PINS
OUTER ROTOR
INNER ROTOR
DRIVE PIN
TIP CLEARANCE:
BODY CLEARANCE:
OIL PUMP COVER
THRUST WASHER
OIL PUMP
SHAFT