Honda CBF600SA Service Manual page 388

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
FRONT WHEEL/SUSPENSION/STEERING
Install the pulser ring.
CBF600SA/NA only
Install and tighten the new mounting bolts to the
specified torque.
TORQUE: 7.0 N·m (0.7 kgf·m, 5.2 lbf·ft)
INSTALLATION
Install the side collars.
Apply thin layer of grease to the front axle surface.
Place the front wheel between the fork legs so that
CBF600SA/NA:Be
the right brake disc is positioned between the brake
careful not to
pads.
damage the speed
sensor on the brake
Install the front axle from the left side until its
caliper.
groove is flush with the outer surface of the left fork
leg.
Hold the axle and tighten the axle bolt to the speci-
fied torque.
TORQUE: 59 N·m (6.0 kgf·m, 43 lbf·ft)
Tighten the right axle holder bolt to the specified
torque.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
13-20
email: info@motomatrix.co.uk
BOLTS
LEFT SIDE:
SIDE COLLARS
HOLDER BOLT
AXLE BOLT
PULSER RING
RIGHT SIDE:
AXLE
HOLDER BOLT