Honda CBF600SA Service Manual page 467

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
HYDRAULIC BRAKE
Remove the front wheel speed sensor (page 16-24).
BRAKE CALIPER
BOLTS
Remove the caliper mounting bolts and the front
brake caliper.
DISASSEMBLY
Remove the caliper bracket from the caliper body.
CALIPER BRACKET
CALIPER BODY
Remove the pad spring and bracket pin boot from
the caliper body.
BOOT
Remove the pad retainer and caliper pin boot from
the caliper bracket.
If the bracket pin boot is hard or deteriorated,
replace it with a new one.
PAD RETAINER
BOOT
PAD SPRING
Place a shop towel over the pistons.
Position the caliper body with the pistons facing
Do not use high
down and apply small squirts of air pressure to the
pressure air or bring
fluid inlet to remove the pistons.
the nozzle too close
to the inlet.
Push the dust seals and piston seals in and lift them
Be careful not to
PISTON SEAL
out.
damage the piston
sliding surface.
Clean the seal grooves, caliper cylinders and pis-
tons with clean brake fluid.
DUST SEAL
15-31
email: info@motomatrix.co.uk