Oil Pump - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
LUBRICATION SYSTEM
Clean the oil pan mating surface thoroughly.
Apply sealant (Three Bond 1207B or an equivalent)
Do not apply more
to the mating surface.
sealant than
necessary.
Install the oil pan onto the lower crankcase.
Install the flange bolts.
Tighten the bolts in a crisscross pattern in two or
three steps.
Install the exhaust pipe (page 2-11).
Fill the crankcase with the recommended oil (page
3-15).
After installation, check that there are no oil leaks.

OIL PUMP

REMOVAL
Drain the engine oil (page 3-15).
Remove the following:
– right crankcase cover (page 9-5)
– oil pan/oil strainer (page 4-6)
Remove the bolt, washer and oil pump driven
sprocket.
Remove the bolts, oil pipe A and seal rings.
Clean the oil pipe A thoroughly.
4-8
email: info@motomatrix.co.uk
BOLTS
DRIVEN SPROCKET
SEAL RINGS
BOLTS
OIL PAN
WASHER
BOLT
OIL PIPE A