Shock Absorber - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
REAR WHEEL/SUSPENSION
Install the rear brake caliper bracket onto the guide
of the swingarm.
Place the rear wheel into the swingarm carefully
Be careful not to
aligning the brake disc between the brake pads.
damage the brake
Install the drive chain over the driven sprocket.
pads and speed
Install the axle washer and rear axle from the left
sensor (CBF600SA/
side.
NA).
Install the axle washer, nut and axle nut.
Adjust the drive chain slack (page 3-19).
Tighten the axle nut to the specified torque.
TORQUE: 98 N·m (10.0 kgf·m, 72 lbf·ft)

SHOCK ABSORBER

REMOVAL
Support the motorcycle using a safety stand or a
hoist, raise the rear wheel off the ground.
Remove the side cover (page 2-5).
Remove the rear wheel (page 14-7).
Remove the shock absorber lower mounting bolt/
nut.
14-14
email: info@motomatrix.co.uk
CALIPER BRACKET
GUIDE
AXLE WASHER
DRIVE CHAIN
AXLE NUT/WASHER
LOWER MOUNTING BOLT/NUT
AXLE
AXLE WASHER