Fuel Cut-Off Relay - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
FUEL SYSTEM (PGM-FI)
Place a new packing onto the fuel pump unit.
Always replace the
packing with a new
one.
Install the fuel pump unit into the fuel tank.
Be careful not to
damage the pump
wire.
Install the fuel pump mounting nuts.
Tighten the nuts in the specified sequence as
shown.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the fuel tank (page 5-60).

FUEL CUT-OFF RELAY

INSPECTION
Disconnect the fuel cut-off relay connector (page 5-
55).
Connect the ohmmeter to the fuel cut-off relay con-
nector terminals.
CONNECTION: A – B
Connect the 12 V battery to the following fuel cut-off
relay connector terminals.
CONNECTION: C – D
There should be continuity only when the 12 V bat-
tery is connected. If there is no continuity when the
12 V battery is connected, replace the fuel cut-off
relay.
5-58
email: info@motomatrix.co.uk
PACKING
3
1
6
4
2
FUEL PUMP
FUEL CUT-OFF RELAY
A
C
D
B
FUEL PUMP
5
7
NUTS
BATTERY