Honda CBF600SA Service Manual page 445

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Connect a commercially available brake bleeder to
the left caliper bleed valve.
Operate the brake bleeder and loosen the bleed
valve.
• If an automatic refill system is not used, add
brake fluid when the fluid level in the reservoir is
low.
• Check the fluid level often while bleeding the
brakes to prevent air from being pumped into the
system.
• When using a brake bleeding tool, follow the
manufacturer's operating instructions.
• If air is entering the bleeder from around the
bleed valve threads, seal the threads with teflon
tape.
Close the bleed valve to the specified torque.
TORQUE: 5.4 N·m (0.60 kgf·m, 4.0 lbf·ft)
Connect a commercially available brake bleeder to
the right caliper upper bleed valve.
Operate the brake bleeder and loosen the bleed
valve.
Close the bleed valve to the specified torque.
TORQUE: 5.4 N·m (0.60 kgf·m, 4.0 lbf·ft)
Perform the bleeding procedure until the system is
completely flushed/bled.
Operate the brake lever. If it is still spongy, bleed the
system again.
If a brake bleeder is not available, use the following
procedure:
Fill the reservoir with DOT 4 brake fluid from a
sealed container.
Connect a bleed hose to the left caliper bleed valve.
Pressurize the system with the brake lever until
lever resistance is felt.
email: info@motomatrix.co.uk
HYDRAULIC BRAKE
BRAKE BLEEDER
BRAKE BLEEDER
BLEED HOSE
BLEED VALVE
15-9