Fuel Line - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

FUEL LINE

Remove the following:
– seat (page 2-4)
– side covers (page 2-5)
– front cowl (CBF600S/SA) (page 2-9)
Remove the fuel tank front mounting bolts/washers
and collars.
Lift the fuel tank and support it using the equipped
tools (eye wrench and handle) as shown.
• Support the fuel tank mount bracket slit with the
eye wrench and hook the handle on the stay of
the frame as shown.
Check the fuel lines for deterioration, damage or
leakage, replace the fuel line if necessary (page 5-
61).
Check the fuel rails and injectors for damage or
leakage, replace them if necessary (page 5-85).
Check the fuel pump mounting area for leakage,
replace the fuel pump packing if necessary (page 5-
56).
Remove a support tools, then lower the fuel tank.
• Route the hoses, wires and harness properly
(page 1-24).
• Be careful not to damage the harness and hoses.
• After installing the fuel tank, make sure the drain,
breather and fuel hoses are not kinked or bound.
• Check the hose joint for loose or disconnection.
email: info@motomatrix.co.uk
BOLTS/WASHERS/COLLARS
SLIT HANDLE
EYE WRENCH
STAY
MAINTENANCE
FUEL FEED HOSE
HOSE JOINT
3-5