Honda CBF600SA Service Manual page 413

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
SERVICE INFORMATION
GENERAL
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc
with a high quality brake degreasing agent.
• After the rear wheel installation, check the brake operation by applying the brake pedal.
• The shock absorber contains nitrogen under high pressure. Do not allow fire or heat near the shock absorber.
• Before disposal of the shock absorber, release the nitrogen (page 14-16).
• When servicing the rear wheel and suspension, support the motorcycle using a safety stand or hoist.
• Use only tires marked "TUBELESS" and tubeless valves on rim marked "TUBELESS TIRE APPLICABLE".
• Use genuine Honda replacement bolts and nuts for all suspension pivot and mounting point.
• Refer to the brake system information (page 15-4).
SPECIFICATIONS
Minimum tire tread depth
Cold tire pres- Driver only
sure
Driver and passenger
Axle runout
Wheel rim Radial
runout
Axial
Wheel balance weight
Drive chain Size/link
Slack
TORQUE VALUES
Rear axle nut
Rear brake disc mounting bolt
Final driven sprocket nut
Swingarm pivot nut
Drive chain case bolt
Drive chain slider screw
Drive chain adjuster lock nut
Rear shock absorber upper mounting nut
Rear shock absorber lower mounting nut
Footpeg holder bolt
Pivot bracket upper nut
Pivot bracket lower nut
Rear pulser ring bolt (CBF600SA/NA)
email: info@motomatrix.co.uk
ITEM
DID
REGINA
98 N·m (10.0 kgf·m, 72 lbf·ft)
42 N·m (4.3 kgf·m, 31 lbf·ft)
108 N·m (11.0 kgf·m, 80 lbf·ft)
98 N·m (10.0 kgf·m, 72 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
5.9 N·m (0.60 kgf·m, 4.3 lbf·ft)
21 N·m (2.1 kgf·m, 15 lbf·ft)
42 N·m (4.3 kgf·m, 31 lbf·ft)
42 N·m (4.3 kgf·m, 31 lbf·ft)
37 N·m (3.8 kgf·m, 27 lbf·ft)
69 N·m (7.0 kgf·m, 51 lbf·ft)
69 N·m (7.0 kgf·m, 51 lbf·ft)
7.0 N·m (0.7 kgf·m, 5.2 lbf·ft)
REAR WHEEL/SUSPENSION
STANDARD
–
2
290 kPa (2.90 kgf/cm , 42 psi)
2
290 kPa (2.90 kgf/cm , 42 psi)
–
–
–
–
525VM2-124LE
525ZRPB-124L
20 – 30 (1.0 – 1.2)
U-nut
ALOC bolt: replace with a new one
U-nut
U-nut
U-nut
U-nut
ALOC bolt: replace with a new one
Unit: mm (in)
SERVICE LIMIT
2.0 (0.08)
–
–
0.2 (0.01)
2.0 (0.08)
2.0 (0.08)
60 g (2.1 oz) max.
–
–
50 (2.0)
14-3