Honda CBF600SA Service Manual page 471

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
HYDRAULIC BRAKE
Remove the pad spring and bracket pin boot from
CALIPER BODY
BOOT
the caliper body.
If the bracket pin boot is hard or deteriorated,
replace it with a new one.
PAD SPRING
Place a shop towel over the pistons.
Position the caliper body with the pistons down and
Do not use high
apply small squirts of air pressure to the fluid inlet
pressure air or bring
to remove the pistons.
the nozzle too close
to the inlet.
Push the dust seals and piston seals in and lift them
Be careful not to
PISTON SEAL
out.
damage the piston
sliding surface.
Clean the seal grooves with clean brake fluid.
DUST SEAL
INSPECTION
Check the caliper cylinder for scoring or other dam-
age.
Measure the each caliper cylinder I.D.
SERVICE LIMIT: 25.460 mm (1.0023 in)
15-35
email: info@motomatrix.co.uk