Honda CBF600SA Service Manual page 386

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
FRONT WHEEL/SUSPENSION/STEERING
To balance the wheel, install wheel weights on the
highest side of the rim, the side opposite the chalk
marks. Add just enough weight so the wheel will no
longer stop in the same position when it is spun. Do
not add more than 60 grams to the wheel.
This model is equipped with a new shape wheel
weight made of zinc spelter. This wheel weight is
incompatible with the conventional one in case of
installation to the wheel.
DISASSEMBLY
Remove the bolts and pulser ring.
CBF600SA/NA only
Remove the bolts and brake discs.
Remove the dust seals.
Install the bearing remover head into the bearing.
From the opposite side, install the bearing remover
shaft and drive the bearing out of the wheel hub.
Remove the distance collar and drive out the other
bearing.
TOOLS:
Bearing remover head, 20 mm 07746-0050600
Bearing remover shaft
13-18
email: info@motomatrix.co.uk
BALANCE WEIGHT
BOLTS
BOLTS
07GGD-0010100 or
07746-0050100
REMOVER HEAD
PULSER RING
BRAKE DISC
DUST SEAL
REMOVER SHAFT