Honda CBF600SA Service Manual page 281

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Install the valve springs with the tightly wound coils
The exhaust valve
facing the combustion chamber.
springs has a green
paint marks and the
Install the valve spring retainer.
intake valve springs
has gray paint
marks.
Install the valve cotters using the special tool as
Grease the cotters
shown.
to ease installation.
To prevent loss of tension, do not compress the
valve spring more than necessary.
TOOLS:
Valve spring compressor
Valve spring compressor
attachment
Tap the valve stems gently with plastic hammer and
Support the
pin driver as shown to seat the cotters firmly.
cylinder head above
the work bench
Install and tighten the spark plugs.
surface to prevent
possible valve TORQUE: 16 N·m (1.6 kgf·m, 12 lbf·ft)
damage.
Apply a locking agent to the bleeding joint threads.
Install the bleeding joint with a new sealing washer
to the cylinder head.
Tighten the bleeding joint to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
email: info@motomatrix.co.uk
EXHAUST VALVE
SPRING
VALVE SPRING COMPRESSOR
07757-0010000
07959-KM30101
PLASTIC HAMMER
PIN DRIVER
CYLINDER HEAD/VALVES
INTAKE VALVE
SPRING
COMBUSTION CHAMBER SIDE
ATTACHMENT
SEALING WASHER
BLEEDING JOINT
8-23