Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Apply molybdenum oil solution to the starter idle
gear shaft sliding surface.
Install the starter idle gear and shaft.
Install the right crankcase cover (page 9-25).
STARTER CLUTCH
REMOVAL
Remove the clutch (page 9-6).
Remove the starter reduction gear from the crank-
case.
Temporarily install the following:
– starter idle gear
– starter idle gear shaft
Insert the gear holder between the starter idle gear
and driven gear as shown.
TOOL:
Gear holder, M2.5
Remove the starter clutch mounting bolt and
washer.
Remove the temporarily installed parts.
Remove the starter clutch outer assembly.
email: info@motomatrix.co.uk
CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
IDLE GEAR/SHAFT
DRIVEN GEAR
07724-0010100
STARTER CLUTCH OUTER ASSEMBLY
SHAFT
STARTER REDUCTION GEAR
GEAR HOLDER
BOLT/WASHER
IDLE GEAR
9-17