Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
ENGINE REMOVAL/INSTALLATION
Loosen the hose band screw and disconnect the
water hose from the thermostat housing cover.
Loosen the hose band screw and disconnect the air
bleed hose from the hose joint on the cylinder head.
Disconnect the horn wire connectors, then release
the horn wire.
Remove the mounting bolt and horn.
Release the EOP switch wire from the guide of pivot
bracket.
Release the EOP switch wire clip from the pivot
bracket.
7-6
email: info@motomatrix.co.uk
SCREW
SCREW
BOLT
HORN
EOP SWITCH WIRE
WATER HOSE
AIR BLEED HOSE
CONNECTORS
GUIDE
WIRE CLIP