Honda CBF600SA Service Manual page 113

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
LUBRICATION SYSTEM
Install the oil pump assembly onto the crankcase
BOLTS
while aligning the oil pump shaft lug with the water
pump shaft groove by turning the oil pump shaft.
Tighten the bolts securely.
Align
OIL PUMP
Apply engine oil to new seal rings and install them
BOLTS
OIL PIPE A
onto the oil pipe A.
Apply a locking agent to the oil pipe A mounting
bolt threads.
Install the oil pipe A and tighten the bolts in the
order as shown.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
• First tighten the No.1 bolt, then tighten the No.2
2
bolt.
1
SEAL RINGS
Apply engine oil to the oil pump driven sprocket
"OUT" MARK
teeth and drive chain
Apply a locking agent to the oil pump driven
sprocket bolt threads.
Install the driven sprocket with its "OUT" mark fac-
ing out.
Install and tighten the driven sprocket bolt/washer
to the specified torque.
TORQUE: 15 N·m (1.5 kgf·m, 11 lbf·ft)
Install the following:
– oil pan/oil strainer (page 4-7)
DRIVEN SPROCKET BOLT/WASHER
– right crankcase cover (page 9-25)
After installation, fill the crankcase with the recom-
mended oil (page 3-15).
Check the oil pressure (page 4-5).
Check that there is no oil leaks.
4-13
email: info@motomatrix.co.uk