Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
SERVICE INFORMATION
GENERAL
• This section covers service of the clutch, starter clutch and gearshift linkage. All service can be done with the engine
installed in the frame.
• Engine oil viscosity and level have an effect on clutch disengagement. When the clutch does not disengage or the
motorcycle creeps with clutch disengaged, inspect the engine oil level before servicing the clutch system.
SPECIFICATIONS
Clutch lever freeplay
Clutch
Clutch outer guide
Primary driven gear I.D.
Oil pump drive sprocket
guide
Oil pump drive sprocket I.D.
Mainshaft O.D. at clutch outer guide
Mainshaft O.D. at oil pump drive sprocket guide
Starter idle gear
Starter driven gear boss O.D.
TORQUE VALUES
Clutch center lock nut
Clutch spring bolt
Oil pump driven sprocket bolt
Starter clutch outer mounting bolt
Shift drum center socket bolt
Shift drum stopper arm pivot bolt
Gearshift spindle return spring pin
Gearshift arm pinch bolt
email: info@motomatrix.co.uk
ITEM
Spring free length
Disc thickness
Plate warpage
I.D.
O.D.
I.D.
O.D.
Gear I.D.
Shaft O.D.
128 N·m (13.1 kgf·m, 94 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
15 N·m (1.5 kgf·m, 11 lbf·ft)
83 N·m (8.5 kgf·m, 61 lbf·ft)
23 N·m (2.3 kgf·m, 17 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
22 N·m (2.2 kgf·m, 16 lbf·ft)
20 N·m (2.0 kgf·m, 15 lbf·ft)
CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
STANDARD
10 – 20 (3/8 – 13/16)
48.2 (1.90)
2.92 – 3.08 (0.115 – 0.121)
–
24.993 – 25.003 (0.9840 – 0.9844)
34.996 – 35.004 (1.3778 – 1.3781)
41.000 – 41.016 (1.6142 – 1.6148)
25.000 – 25.021 (0.9843 – 0.9851)
34.950 – 34.975 (1.3760 – 1.3770)
35.025 – 35.145 (1.3789 – 1.3837)
24.980 – 24.990 (0.9835 – 0.9839)
24.980 – 24.990 (0.9835 – 0.9839)
10.013 – 10.035 (0.3942 – 0.3951)
9.991 – 10.000 (0.3933 – 0.3937)
45.657 – 45.673 (1.7975 – 1.7981)
Apply engine oil to the threads and seat-
ing surface.
Stake.
Apply a locking agent to the threads.
Apply engine oil to the threads and seat-
ing surface.
Apply a locking agent to the threads.
Apply a locking agent to the threads.
Unit: mm (in)
SERVICE LIMIT
–
47.2 (1.86)
2.6 (0.10)
0.30 (0.012)
25.013 (0.9848)
34.986 (1.3774)
41.026 (1.6152)
25.031 (0.9855)
34.940 (1.3756)
35.155 (1.3841)
24.960 (0.9827)
24.960 (0.9827)
10.05 (0.396)
9.98 (0.393)
45.642 (1.7969)
9-3