Honda CBF600SA Service Manual page 428

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
REAR WHEEL/SUSPENSION
Hook the main wire harness to the clip on the frame.
Tighten the lower mounting nut to the specified
torque.
TORQUE: 42 N·m (4.3 kgf·m, 31 lbf·ft)
Install the removed parts in the reverse order of
removal.
Install the rear wheel (page 14-13).
Install the side cover (page 2-5).
SWINGARM
REMOVAL
Support the motorcycle using a safety stand or a
hoist, raise the rear wheel off the ground.
Remove the side cover (page 2-5).
Remove the rear wheel (page 14-7)
Remove the socket bolts and left footpeg holder.
Remove the bolts and drive chain case.
Carefully slide back
drive chain case.
14-18
email: info@motomatrix.co.uk
MAIN WIRE HARNESS
LOWER MOUNTING BOLT/NUT
SOCKET BOLTS
LEFT FOOTPEG HOLDER
DRIVE CHAIN CASE
BOLTS
CLIP