Honda CBF600SA Service Manual page 251

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
ENGINE REMOVAL/INSTALLATION
Install the bracket bolts, nuts and tighten the pivot
PIVOT NUTS
bracket nuts to the specified torque.
TORQUE: 69 N·m (7.0 kgf·m, 51 lbf·ft)
Tighten the swingarm pivot nut to the specified
torque.
TORQUE: 98 N·m (10.0 kgf·m, 72 lbf·ft)
BOLTS/NUTS
Connect the sidestand switch 2P (Green) connector.
2P (Green) CONNECTOR
Install the front engine hanger bracket to the frame.
HANGER BRACKET
Install the right front engine hanger bracket bolts,
horn stay and nuts.
BOLTS/WASHERS/NUTS
HORN WIRE
Install the left front engine hanger bracket bolts,
washers and nuts.
BOLTS/WASHERS/NUTS
7-11
email: info@motomatrix.co.uk