Crankcase Rear Cover; Installation - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

CRANKCASE REAR COVER

INSTALLATION

Set the drive chain guide plate onto the rear cover
B.
Install the drive chain guide plate/rear cover B and
tighten the bolts securely.
Set the sidestand switch wire clip to the hole of rear
cover B.
Install the gearshift arm, aligning its slit with the
punch mark on the gearshift spindle.
Install and tighten the pinch bolt to the specified
torque.
TORQUE: 20 N·m (2.0 kgf·m, 15 lbf·ft)
Install the rear cover B, aligning its bosses with the
grommets of rear cover A.
email: info@motomatrix.co.uk
ENGINE REMOVAL/INSTALLATION
REAR COVER B
WIRE CLIP
GEARSHIFT ARM
PINCH BOLT
Align
REAR COVER B
GUIDE PLATE
BOLTS
HOLE
REAR COVER A
7-17