D-Link xStack DGS-3420 Series Reference Manual page 535

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
45-1 enable jwac
Description
This command is used to enable the Japanese Web-based access control (JWAC) function. JWAC
and WAC are mutually exclusive functions. That is, they can not be enabled at the same time.
Using the JWAC function, PC users need to pass two stages of authentication. The first stage is to do
the authentication with the quarantine server and the second stage is the authentication with the
switch. For the second stage, the authentication is similar to WAC, except that there is no port VLAN
membership change by JWAC after a host passes authentication. The RADIUS server will share the
server configuration defined by the 802.1X command set.
Format
enable jwac
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable JWAC:
DGS-3420-28SC:admin#enable jwac
Command: enable jwac
Success.
DGS-3420-28SC:admin#
45-2 disable jwac
Description
This command is used to disable JWAC.
Format
disable jwac
Parameters
None.
530