D-Link xStack DGS-3420 Series Reference Manual page 508

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
44-1 create address_binding ip_mac ipaddress
Description
This command is used to create an IP-MAC-Port binding entry.
Format
create address_binding ip_mac ipaddress <ipaddr> mac_address <macaddr> {ports[<portlist>|
all ]}
Parameters
<ipaddr> - Specify the IP address.
mac_address - Specify the MAC address.
<macaddr> - Enter the MAC address here.
ports - (Optional) Configure the portlist or all ports.
<portlist> - Specify a range of ports to be configured.
all - Specify to apply to all the ports.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create address binding on the switch:
DGS-3420-28SC:admin#create address_binding ip_mac ipaddress 10.1.1.1 mac_address
00-00-00-00-00-11
Command: create address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-00-
00-11
Success.
DGS-3420-28SC:admin#
44-2 create address_binding ip_mac ipv6address
Description
This command is used to create an IP-MAC-Port binding entry using IPv6.
Format
create address_binding ip_mac ipv6address <ipv6addr> mac_address <macaddr> {ports
[<portlist> | all]}
503