Config Stp Priority - D-Link xStack DGS-3420 Series Reference Manual
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#
To configure the STP version with the same value of the old configuration:
DGS-3420-28SC:admin#config stp version mstp
Command: config stp version mstp
Configure value is the same with current value.
Success.
DGS-3420-28SC:admin#
16-12 config stp priority
Description
One of the parameters used to select the Root Bridge.
Format
config stp priority <value 0-61440> instance_id <value 0-64>
Parameters
<value 0-61440> - Specify the bridge priority value, which must be divisible by 4096. The default
value is 32768.
instance_id - Specify the identifier value, which is used to distinguish different STP instances.
<value 0-64> - Specify the identifier value, which is used to distinguish different STP instances.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the STP instance ID:
DGS-3420-28SC:admin#config stp priority 61440 instance_id 0
Command: config stp priority 61440 instance_id 0
Success.
DGS-3420-28SC:admin#
907
Advertisement
Table of Contents
