D-Link xStack DGS-3420 Series Reference Manual page 515

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Save Filename
Function Version
DGS-3420-28SC:admin#
To display address binding information for ports 1 to 10:
DGS-3420-28SC:admin#show address_binding ports 1-10
Command: show address_binding ports 1-10
ARP:ARP Inspection
Port ARP IP
----- -------- -------- -------- ---- --------- ----------- --------------
1 Disabled Disabled Disabled All
2 Disabled Disabled Disabled All
3 Disabled Disabled Disabled All
4 Disabled Disabled Disabled All
5 Disabled Disabled Disabled All
6 Disabled Disabled Disabled All
7 Disabled Disabled Disabled All
8 Disabled Disabled Disabled All
9 Disabled Disabled Disabled All
10 Disabled Disabled Disabled All
DGS-3420-28SC:admin#
44-9 show address_binding blocked
Description
This command is used to display address binding information for blocked entries.
Format
show address_binding blocked [all | vlan_name <vlan_name> mac_address <macaddr>]
Parameters
blocked - (Optional) Specify the address database that system auto learned and blocked.
all - Specify to display all.
vlan_name - Specify the VLAN name (the blocked MAC belongs to).
<vlan_name> - Enter the VLAN name here.
mac_address - Specify the MAC address.
<macaddr> - Enter the MAC address here.
: dhcpsnp.cfg
: 3.95
IP:IP Inspection
ND Prot Zero IP
ND:ND Inspection
DHCP Packet Stop Learning
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
510
Prot:Protocol
Threshold/Mode
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal