D-Link xStack DGS-3420 Series Reference Manual page 434

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the NetBIOS filter state:
DGS-3420-28SC:admin#config filter netbios 1-10 state enable
Command: config filter netbios 1-10 state enable
Success.
DGS-3420-28SC:admin#
36-4 show filter netbios
Description
This command is used to display the NetBIOS filter state on the switch.
Format
show filter netbios
Parameters
None.
Restrictions
None.
Example
To display the NetBIOS filter state:
DGS-3420-28SC:admin#show filter netbios
Command: show filter netbios
Enabled Ports: 1-3
DGS-3420-28SC:admin#
429