D-Link xStack DGS-3420 Series Reference Manual page 481
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#config igmp_snooping multicast_vlan forward_unmatched enable
Command: config igmp_snooping multicast_vlan forward_unmatched enable
Success.
DGS-3420-28SC:admin#
40-14 config igmp_snooping multicast_vlan auto_assign_vlan
Description
This command is used to enable or disable the assignment of IGMP control packets to the right ISM
VLAN. If auto assign VLAN is enabled, the Switch will check for group matching with multicast VLAN
profiles of which the ingress port belongs to. If there is a match, the result is "in profile" and the
matching multicast VLAN will be set as a packet VLAN. If this function is disabled, the Switch will do
VID checking, and afterwards, if the group does not match the current profile binding, the Switch will
drop this packet.
Format
config igmp_snooping multicast_vlan auto_assign_vlan [enable | disable]
Parameters
enable - Specifies to enable the auto assign VLAN function.
disable - Specifies to disable the auto assign VLAN function.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the auto assign VLAN function of multicast VLAN:
DGS-3420-28SC:admin#config igmp_snooping multicast_vlan auto_assign_vlan enable
Command: config igmp_snooping multicast_vlan auto_assign_vlan enable
Success.
DGS-3420-28SC:admin#
476
Advertisement
Table of Contents
