D-Link xStack DGS-3420 Series Reference Manual page 906

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To show STP ports:
DGS-3420-28SC:admin#show stp ports
Command: show stp ports
MSTP Port Information
----------------------
Port Index : 1
External PathCost : Auto/200000
Port RestrictedRole : False,
Port Forward BPDU : Disabled
MSTI Designated Bridge
----- ------------------
0 N/A
DGS-3420-28SC:admin#
16-4 show stp mst_config_id
Description
This command is used to display the three elements of the MST configuration Identification, including
Configuration Name, Revision Level, and the MST configuration Table. The default Configuration
name is the MAC address of the bridge. If two bridges have the same three elements in
mst_config_id, that means they are in the same MST region.
Format
show stp mst_config_id
Parameters
None.
Restrictions
None.
Example
Display the STP MST Config ID:
DGS-3420-28SC:admin#show stp mst_config_id
Command: show stp mst_config_id
Current MST Configuration Identification
----------------------------------------
, Hello Time: 2 /2 , Port STP : Enabled
, Edge Port : False/No , P2P : Auto /Yes
Port RestrictedTCN : False
Internal PathCost
-----------------
200000
901
,
Prio Status Role
---- ---------- ----------
128 Disabled Disabled