xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
62-14 disable snmp authenticate_traps
Description
This command is used to disable SNMP authentication failure trap support.
Format
disable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable SNMP authentication trap support:
DGS-3420-28SC:admin#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-3420-28SC:admin#
62-15 enable snmp linkchange_traps
Description
This command is used to enable SNMP linkchange trap support.
Format
enable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command..
700