D-Link xStack DGS-3420 Series Reference Manual page 773

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
70-5 show power_saving
Description
This command is used to display the current state of power saving.
Format
show power_saving {length_detection | link_detection | led | port | hibernation}
Parameters
length_detection - (Optional) Display the length detection configuration of power saving.
link_detection - (Optional) Display the link detection configuration of power saving.
led - (Optional) Display the port LED configuration of power saving.
port - (Optional) Display the port configuration of power saving.
hibernation - (Optional) Display the system hibernation configuration of power saving.
If no parameter is specified, all configurations of power saving will be displayed.
Restrictions
None.
Example
To display the power saving function setting:
DGS-3420-28SC:admin#show power_saving
Command: show power_saving
Function Version: 3.00
Link Detection State: Enabled
Length Detection State: Disabled
Power Saving Configuration On System Hibernation
----------------------------------------------------
State: Disabled
Power Saving Configuration On Port LED
------------------------------------------
State: Disabled
Power Saving Configuration On Port
------------------------------------------
State: Disabled
DGS-3420-28SC:admin#
768