D-Link xStack DGS-3420 Series Reference Manual page 459

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To add port 9 to 10 to be IGMP snooping static member ports for group 239.1.1.1 on default VLAN:
DGS-3420-28SC:admin#config igmp_snooping static_group vlan default 239.1.1.1 add 9-
10
Command: config igmp_snooping static_group vlan default 239.1.1.1 add 9-10
Success.
DGS-3420-28SC:admin#
39-14 delete igmp_snooping static_group
Description
This command is used to delete an IGMP snooping static group on the switch. The deletion of an
IGMP snooping static group will not affect the IGMP snooping dynamic member ports for a group.
Format
delete igmp_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>
Parameters
vlan - Specify the name of the VLAN on which the router port resides.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - Specify the VLAN ID list on which the router port resides.
<vlanid_list> - Specify the VLAN ID list.
<ipaddr> - Specify the multicast group IP address.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an IGMP snooping static group from the default VLAN, group 239.1.1.1:
DGS-3420-28SC:admin#delete igmp_snooping static_group vlan default 239.1.1.1
Command: delete igmp_snooping static_group vlan default 239.1.1.1
Success.
DGS-3420-28SC:admin#
454