D-Link xStack DGS-3420 Series Reference Manual page 524

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
no_limit - Specify an unlimited number of entries.
ipv6 – (Optional) Specifies that the configuration is for IPv6 DHCP Snooping.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the maximum number of entries that ports 1 to 3 can learn to 10:
DGS-3420-28SC:admin#config address_binding dhcp_snoop max_entry ports 1-3 limit
10
Command: config address_binding dhcp_snoop max_entry ports 1-3 limit 10
Success.
DGS-3420-28SC:admin#
44-19 config address_binding recover_learning ports
Description
This command is used to recover port learning.
Format
config address_binding recover_learning ports [<portlist> | all]
Parameters
<portlist> - Specify the list of ports to recover learning.
all - Specify to recover learning for all ports.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure ports 1 to 3 to recover learning:
DGS-3420-28SC:admin#config address_binding recover_learning ports 1-3
Command: config address_binding recover_learning ports 1-3
Success.
DGS-3420-28SC:admin#
519