D-Link xStack DGS-3420 Series Reference Manual page 105

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
method_list_name - Specifies that the accounting service should use the AAA user-defined
method list specified by the "create accounting method_list_name <string 15>" command.
<string 15> - Enter the method list name used here. This name can be up to 15 characters
long.
default_method_list - Specifies that the accounting service should use the AAA default
method list.
disable - Disable the specified accounting service.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the state of the RADIUS accounting service shell to enable:
DGS-3420-28SC:admin# config accounting service shell state enable
Command: config accounting service shell state enable
Success
DGS-3420-28SC:admin#
4-52 config accounting service command
Description
This command is used to configure the state of the specified accounting service.
Format
config accounting service command {administrator | operator | power_user | user}
[method_list_name <string> | none]
Parameters
administrator - (Optional) Specifies the accounting service for all administrator level commands.
operator - (Optional) Specifies the accounting service for all operator level commands.
power_user - (Optional) Specifies the accounting service for all power-user level commands.
user - (Optional) Specifies the accounting service for all user level commands.
method_list_name - Specifies the accounting service by the AAA user-defined method list.
<string> - Enter the method list name used here.
none - Specifies to disable accounting services for the specified command level.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
100