D-Link xStack DGS-3420 Series Reference Manual page 872
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
add - Specify to add a specific candidate to the group.
<candidate_id 1-100> - Specify to add a specific candidate to the group.
<password> - (Optional) Specify the password of a candidate, if necessary.
delete - Specify to remove a specific member from the group.
<member_id 1-32> - Specify to remove a specific member from the group. The ID is from 1 to 32.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a member:
DGS-3420-28SC:admin#config sim_group add 2
Command: config sim_group add 2
Please wait for ACK !!!
SIM Config Success !!!
Success.
DGS-3420-28SC:admin#
To delete a member:
DGS-3420-28SC:admin#config sim_group delete 1
Command: config sim_group delete 1
Please wait for ACK !!!
SIM Config Success !!!
Success.
DGS-3420-28SC:admin#
13-6
config sim
Description
This command is used to configure the role state and parameters of discovery protocol on the switch.
Format
config sim [[commander {group_name <groupname 64>} | candidate] | dp_interval <sec 30-90>
| hold_time <sec 100-255>]
867
Advertisement
Table of Contents
