xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Copyright(C) 2011 D-Link Corporation. All rights reserved.
===============================================================================
<Function Key>
Ctrl+C
Quit without save
Ctrl+W
Save and quit
-------------------------------------------------------------------------------
60-2
show greeting_message
Description
This command is used to display the currently configured greeting message on the switch.
Format
show greeting_message
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To display the currently configured greeting message:
Command Line Interface
Firmware: Build 1.50.010
<Control Key>
left/right/
up/down
Ctrl+D
Ctrl+X
Ctrl+L
681
Move cursor
Delete line
Erase all setting
Reload original setting