xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To initialize the authentication state machine of some or all:
DGS-3420-28SC:admin# config 802.1x init port_based ports all
Command: config 802.1x init port_based ports all
Success.
DGS-3420-28SC:admin#
3-14
config 802.1x max_users
Description
This command is used to configure the 802.1X maximum number of users of the system.
Format
config 802.1x max_users [<value 1-448> | no_limit]
Parameters
<value 1-448> - Specify the maximum number of users.
no_limit - Specify an unlimited number of users.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the 820.1X maximum numbers of the system:
DGS-3420-28SC:admin# config 802.1x max_users 2
Command: config 802.1x max_users 2
Success.
DGS-3420-28SC:admin#
3-15
config 802.1x reauth
Description
This command is used to reauthenticate the device connected with the port. During the
reauthentication period, the port status remains authorized until failed reauthentication.
43