D-Link xStack DGS-3420 Series Reference Manual page 658

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
vlan - (Optional) Specify the name of the VLAN on which the static group resides.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - (Optional) Specify the ID of the VLAN on which the static group resides.
<vlanid_list> - Specify the VLAN ID list.
<ipv6addr> - (Optional) Specify the multicast group IPv6 address.
Restrictions
None.
Example
To display all the MLD snooping static groups:
DGS-3420-28SC:admin#show mld_snooping static_group
Command: show mld_snooping static_group
VLAN ID/Name
------------- ---------------
1/Default
Total Entries : 1
DGS-3420-28SC:admin#
58-8 show mld_snooping statistic counter
Description
This command is used to display the MLD snooping statistics counters for MLD protocol packets that
are transmitted or received by the switch since MLD snooping was enabled.
Format
show mld_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list> | ports
<portlist>]
Parameters
vlan - Specify a VLAN to be displayed.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - Specify a list of VLANs to be displayed.
<vlanid_list> - Specify the VLAN ID list.
ports – Specify a list of ports to be displayed.
<portlist> - Specify a list of ports.
IP Address Static Member Ports
---------------------
FF1E::1 9-10
653