xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#
31-12 show voice_vlan voice_device
Description
This command is used to show voice devices that are connected to the ports. The start time is the time
when the device is detected on this port and the activate time is the latest time when the device sends
the traffic.
Format
show voice_vlan voice_device {ports <portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to display.
Note: If no parameter is specified, the system will display the connected Voice device of all
ports.
Restrictions
None.
Example
To display voice VLAN device ports 1 to 2:
DGS-3420-28SC:admin#show voice_vlan voice_device ports 1-2
Command: show voice_vlan voice_device ports 1-2
Ports
Voice Device
-----
-----------------
Total Entries : 0
DGS-3420-28SC:admin#
Start Time
Last Active Time
----------------
-----------------
1022