D-Link xStack DGS-3420 Series Reference Manual page 1005

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1 <10 ms. 1345:142::11
2 <10 ms. 2011:14::100
3 <10 ms. 3000::1
Trace complete.
DGS-3420-28SC:admin#
Trace the IPv6 routed path between the switch and 1210:100::11 with port 40000:
DGS-3420-28SC:admin# traceroute6 1210:100::11 port 40000
Command: traceroute6 1210:100::11 port 40000
1 <10 ms. 3100::25
2 <10 ms. 4130::100
3 <10 ms. 1210:100::11
Trace complete.
DGS-3420-28SC:admin#
29-20 telnet
Description
This command is used to login a Telnet server.
Format
telnet [<ipaddr> | <domain_name 255> | <ipv6addr>] {tcp_port <value 1-65535>}
Parameters
<ipaddr> - Specify the IP address of the Telnet server.
<domain_name 255> - Specify the domain name of the telnet server.
<ipv6addr> - Specify the IPv6 address of the Telnet server.
tcp_port - (Optional) Specify the Telnet server port number to be connected to. If not specified, the
default port is 23.
<value 1-65535> - Enter a value between 1 and 65535.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To Telnet to a switch by specifying the IP address:
1000