D-Link xStack DGS-3420 Series Reference Manual page 460

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
39-15 show igmp_snooping static_group
Description
This command is used to display the IGMP snooping static multicast group.
Format
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
Parameters
vlan - Specify the name of the VLAN on which the router port resides.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - Specify the VLAN ID list on which the router port resides.
<vlanid_list> - Specify the VLAN ID list.
<ipaddr> - Specify the multicast group IP address.
Restrictions
None.
Example
To display all the IGMP snooping static groups:
DGS-3420-28SC:admin#show igmp_snooping static_group
Command: show igmp_snooping static_group
VLAN ID/Name
---------------------------------------
1/Default
Total Entries : 1
DGS-3420-28SC:admin#
39-16 show igmp_snooping statistic counter
Description
This command is used to display the IGMP snooping statistics counter for IGMP protocol packets that
are transmitted or received by the switch since IGMP snooping was enabled.
Format
show igmp_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list> | ports
<portlist>]
IP Address Static Member Ports
-------------- --------------------
239.1.1.1 9-10
455