D-Link xStack DGS-3420 Series Reference Manual page 874

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#config sim dp_interval 30
Command: config sim dp_interval 30
Success.
DGS-3420-28SC:admin#
To change the hold time of discovery protocol:
DGS-3420-28SC:admin#config sim hold_time 200
Command: config sim hold_time 200
Success.
DGS-3420-28SC:admin#
13-7 download sim_ms
Description
This command is used to download firmware or configuration from a TFTP server to indicated devices.
Format
download sim_ms [firmware_from_tftp | configuration_from_tftp] <ipaddr> <path_filename>
{[members <mslist 1-32> | all ]}
Parameters
firmware_from_tftp - Specify to download firmware from a TFTP server.
configuration_from_tftp - Specify to download configuration from a TFTP server.
<ipaddr> - Specify the IP address of the TFTP server.
<path_filename> - Specify the file path of firmware or configuration in the TFTP server.
members – (Optional) Specify a range of members which download this firmware or configuration.
<mslist 1-32> - Specify a range of members which download this firmware or configuration.
all - Specify all members which download this firmware or configuration.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To download firmware:
DGS-3420-28SC:admin#download sim_ms firmware_from_tftp 10.55.47.1 D:\dwl600x.tfp
members 1-3
Commands: download sim_ms firmware_from_tftp 10.55.47.1 D:\dwl600x.tfp members 1-3
869