D-Link xStack DGS-3420 Series Reference Manual page 352
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin# config dhcpv6_relay hop_count 4
Command: config dhcpv6_relay hop_count 4
Success.
DGS-3420-28SC:admin#
24-4
config dhcpv6_relay
Description
The command could add/delete an IPv6 address which is a destination to forward (relay) DHCPv6
packets.
Format
config dhcpv6_relay [add | delete] ipif <ipif_name 12> <ipv6addr>
Parameters
add - Add an IPv6 destination to the DHCPv6 relay table.
delete - Delete an IPv6 destination from the DHCPv6 relay table
ipif - The name of the IP interface in which DHCPv6 relay is to be enabled.
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters long.
<ipv6addr> - The DHCPv6 server IP address.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a DHCPv6 server to the relay table:
DGS-3420-28SC:admin# config dhcpv6_relay add ipif System
2001:DB8:1234:0:218:FEFF:FEFB:CC0E
Command: config dhcpv6_relay add ipif System 2001:DB8:1234:0:218:FEFF:FEFB:CC0E
Success.
DGS-3420-28SC:admin#
24-5
config dhcpv6_relay ipif
Description
The command is used to configure the DHCPv6 relay state of one specific interface or all interfaces.
347
Advertisement
Table of Contents
