D-Link xStack DGS-3420 Series Reference Manual page 980

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To add a server address for System interface:
DGS-3420-28SC:admin# config udp_helper add ipif System 20.0.0.90
Command: config udp_helper add ipif System 20.0.0.90
Success.
DGS-3420-28SC:admin#
28-4 config udp_helper delete ipif
Description
This command is used to delete a UDP Helper server address for specific interface of Switch.
Format
config udp_helper delete ipif <ipif_name 12> <ipaddr>
Parameters
ipif - Specifies the name of the IP interface that receives the UDP broadcast.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
<ipaddr> - Enter the UDP Helper server IP address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a server address for System interface:
DGS-3420-28SC:admin# config udp_helper delete ipif System 20.0.0.90
Command: config udp_helper delete ipif System 20.0.0.90
Success.
DGS-3420-28SC:admin#
28-5 config udp_helper udp_port add
Description
This command is used to add a UDP port for the UDP Helper function on the Switch.
975