D-Link xStack DGS-3420 Series Reference Manual page 767

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
show poe ports {<portlist>}
Parameters
ports - (Optional) Specifies the list of ports to be displayed here.
<portlist> - Enter the list of ports, used for the display, here.
If no parameter is specified, the system will display the status for all the ports.
Restrictions
None.
Example
To display PoE port configurations on port 1 to 6:
DGS-3420-28PC:admin# show poe ports 1:1-1:6
Command: show poe ports 1:1-1:6
Port State Priority
Class Power(mW) Voltage(decivolt)
Status
===============================================================================
1:1 Enabled Critical
0 0
OFF : Interim state during line detection
1:2 Enabled Critical
0 0
OFF : Interim state during line detection
1:3 Enabled Critical
0 0
OFF : Interim state during line detection
1:4 Enabled Critical
0 0
OFF : Interim state during line detection
1:5 Enabled Low
0 0
OFF : Interim state during line detection
1:6 Enabled Low
0 0
OFF : Interim state during line detection
DGS-3420-28PC:admin#
Power Limit(mW)
4200 (Class 1)
0
4200 (Class 1)
0
4200 (Class 1)
0
4200 (Class 1)
0
7000 (User-defined)
0
7000 (User-defined)
0
762
Time Range
Current(mA)
0
0
0
0
0
0