Create Rspan Vlan - D-Link xStack DGS-3420 Series Reference Manual
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
disable rspan
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the RSPAN globally:
DGS-3420-28SC:admin#disable rspan
Command: disable rspan
Success.
DGS-3420-28SC:admin#
9-3
create rspan vlan
Description
This command is used to create an RSPAN VLAN. Up to 16 RSPAN VLANs can be created.
Format
create rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]
Parameters
vlan_name - Create the RSPAN VLAN by VLAN name.
<vlan_name> - Specify the VLAN name.
vlan_id - Create the RSPAN VLAN by VLAN ID.
<vlanid 1-4094> - Specify the VLAN ID between 1 and 4094.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create an RSPAN VLAN entry by VLAN name "v2":
838
Advertisement
Table of Contents
